Nokia E63 RM-437 Software Update Using Phoenix Service Software

Nokia E63 RM-437 Software Update Using Phoenix Service Software

Nokia E63 RM-437 Software Update Using Phoenix Service Software

Tools & Materials :
  1. Latest Phoenix Service Software
  2. CA-101 Usb Data Cable
  3. Nokia E63 RM-437 Latest Firmware Package
Step By Step :
  1. Open Phoenix Service Software
  2. Pick Open Product
  3. Pick RM-437
  4. Pick " Flashing " Tab
  5. Pick Firmware Update
  6. Browse Nokia E63 RM-437 Firmware Package on product code box
  7. Check Dead Phone Usb Flashing
  8. Click " Refurbish " Tab
  9. Connect phone to Usb
  10. Wait until all process done
Here's the log operations :

Flashing started
Creating product data items list
Product data items list created
Backup not required
Flashing phone
Initializing
Scanning image files...
Waiting for USB device...
1. Make sure USB cable, Battery and charger are removed from device.
2. Insert USB cable to device
3. Insert Battery to device
4. Insert Charger to device
--- Press phone's power button! ---
Loading secondary boot code: 14592 bytes
Secondary boot loaded
Loading update server code: 1953281 bytes
Update server loaded
Asic CMT: Verifying communication to device...
Asic CMT: Verifying communication to device...
Error sending ADL_LDR_GET_MS_INFO_REQ
Error parsing MS info data. Attempting to continue flashing
Flashing SingleAsic device...
Asic CMT: Start programming 110445 KB...
Asic CMT: Erasing rm437_200.21.012_prd.c00
Asic CMT: Erasing area 1...
Asic CMT: Erasing area 2...
Asic CMT: Erasing area 3...
Asic CMT: Partitioning rm437_200.21.012_prd.c00
Asic CMT: Partitioning area 1...
Asic CMT: Erasing rm437_200.21.012_prd.v26
Asic CMT: Erasing area 1...
Asic CMT: Erasing rm437_200.21.012.27U
Asic CMT: Erasing RM437_ENO_008.07.45_100.71.920.a01.fpsx
Asic CMT: Erasing sofie_erase_y_drive.fpsx
Asic CMT: Erasing area 1...
Asic CMT: Programming rm437_200.21.012_prd.c00
Asic CMT: Programming  0%
Asic CMT: Programming  2%
Asic CMT: Programming  4%
Asic CMT: Programming  6%
Asic CMT: Programming  8%
Asic CMT: Programming  10%
Asic CMT: Programming  12%
Asic CMT: Programming  14%
Asic CMT: Programming  16%
Asic CMT: Programming  18%
Asic CMT: Programming  20%
Asic CMT: Programming  22%
Asic CMT: Programming  24%
Asic CMT: Programming  26%
Asic CMT: Programming  28%
Asic CMT: Programming  30%
Asic CMT: Programming  32%
Asic CMT: Programming  34%
Asic CMT: Programming  36%
Asic CMT: Programming  38%
Asic CMT: Programming  40%
Asic CMT: Programming  42%
Asic CMT: Programming  44%
Asic CMT: Programming  46%
Asic CMT: Programming  48%
Asic CMT: Programming  50%
Asic CMT: Programming  52%
Asic CMT: Programming  54%
Asic CMT: Programming  56%
Asic CMT: Programming rm437_200.21.012_prd.v26
Asic CMT: Programming  58%
Asic CMT: Programming  60%
Asic CMT: Programming  62%
Asic CMT: Programming  64%
Asic CMT: Programming  66%
Asic CMT: Programming  68%
Asic CMT: Programming  70%
Asic CMT: Programming  72%
Asic CMT: Programming  74%
Asic CMT: Programming  76%
Asic CMT: Programming  78%
Asic CMT: Programming  80%
Asic CMT: Programming  82%
Asic CMT: Programming  84%
Asic CMT: Programming rm437_200.21.012.27U
Asic CMT: Programming  86%
Asic CMT: Programming  88%
Asic CMT: Programming  90%
Asic CMT: Programming  92%
Asic CMT: Programming  94%
Asic CMT: Programming  96%
Asic CMT: Programming  98%
Asic CMT: Programming RM437_ENO_008.07.45_100.71.920.a01.fpsx
Finished Flashing
Rebooting to RFS Mode
Asic CMT: Verifying communication to device...
Phone flashing completed. Waiting for phone to boot up
Bootup successful
Verifying communication to product (before flash finalizing)
Communication verified
Product code changed
Doing factorysets
Factorysets complete
Loading default data to phone
Loading default data to phone
Getting Data Package
Reading product state
Starting backup/restore sub-procedure: data item pre-delay
data item pre-delay
data item pre-delay
Sub-procedure completed: Succeeded., result code: 0
Starting to backup/restore data item: ProductProfile, version: 1.0
Data Item backup/restore completed: Succeeded., result code: 0
Starting backup/restore sub-procedure: data item post-delay
data item post-delay
data item post-delay
Sub-procedure completed: Succeeded., result code: 0
Backup/restore result: 0 out of 1 items were not backed up
Default data loading complete
Stopping all operations, returning phone to default mode
All operations completed
Product flashing succeeded.

Nokia E63 RM-437 Software Update Using Phoenix Service Software


5 comments to "Nokia E63 RM-437 Software Update Using Phoenix Service Software"

  • i am having an error while trying this plzzz HELP

    here is the log.

    Flashing started
    Creating product data items list
    .
    .
    .
    .
    Asic CMT: Programming 96%
    Asic CMT: Programming 98%
    Asic CMT: Programming 100%
    Finished Flashing
    Rebooting to RFS Mode
    Asic CMT: Verifying communication to device...
    Waiting for communication response: 25
    Waiting for communication response: 24
    Waiting for communication response: 23
    Waiting for communication response: 22
    Waiting for communication response: 21
    Waiting for communication response: 20
    Waiting for communication response: 19
    Waiting for communication response: 18
    Waiting for communication response: 17
    Waiting for communication response: 16
    Waiting for communication response: 15
    Waiting for communication response: 14
    Waiting for communication response: 13
    Waiting for communication response: 12
    Waiting for communication response: 11
    Waiting for communication response: 10
    Waiting for communication response: 9
    Waiting for communication response: 8
    Waiting for communication response: 7
    Waiting for communication response: 6
    Waiting for communication response: 5
    Waiting for communication response: 4
    Waiting for communication response: 3
    Waiting for communication response: 2
    Waiting for communication response: 1
    Error 0x8401F121 communicating to phone. Unable to verify comm.
    Warning: Unable to communicate to product after flashing
    Starting to recover the phone
    Recoverying phone
    Initializing
    Scanning image files...
    ERROR: Unable to detect device 0x8401F145. Check USB connection!
    plz reply to tbkumardev@gmail.com

  • Sory 4 late reply..,
    Try to change with fully charged battery..,

  • I cannot use the product. When I start the Phoenix SW and follow the steps it says there is no DP though RM437 is installed. Can you help where do I install or how to proceed

  • Please Intsall full firmware installer to directory C:\\programfiles\nokia\phoenix
    and then try again..,

  • just reinstall the selected item from nokia ovi suite ...and do a custom update and it will not ask for lock code ever again...

Post a Comment

Please Click +1 Button If You Like This Blog

Popular This Week

Subscription

Enter your email address:

Delivered by FeedBurner

Followers

Web Stats


PageRank Checking Icon


free counters

Archive

There was an error in this gadget