How To Flash LG KM900 Using GSMULTI V30

How To Flash LG KM900 Using GSMULTI V30

1. Follow this tutorial carefully
2. Always backup all data on device storage if it possible.
3. Do at your own risk

1. Usb data cable
2. GSMULTI V30 | DOWNLOAD |
3. Setup_USB_PortMapping_04.exe | Download |
4. LG KM900 DLL files | Download |
5. LG KM900 Firmware | Download | Other Firmware version |

1. Download, Extract and Install GSMULTI V30
2. Install Infineon driver, go to directory C:\GSMULTI\UsbDrivers\INFINEON, then install Setup
3. Download and install Setup_USB_PortMapping_04.exe
4. Go to directory C:\GSMULTI, then open USBMap_V04
5. Select Infineon SGold series, connect powered off phone to usb, install driver if asked
6. Click Mapping start, wait until phone detected and then click save & exit.
7. Unplug phone from usb
8. Open GSMULTI V30
9. Click Setting => Configuration, then select DLL files and Firmware files => check USB => Click Ok
10. Click START button
11. Connect powered off phone to usb and flashing started, wait until all process done / PASS.
12. Reconnect phone if GSMULTI doesn't started flashing

Usb mappimg

Add Dll and Firmware files, set configurations

Flashing started

Flashing PASS

Do you like this article? Share It!